10PK LSA FDFI TRIPLE IDLER MOUNT
Part # 99-AMNT15039
10PK LSA FEAD for Harrop FDFI LS variants (Idler Mount Part # 99-AMNT15039)
• The 10PK FEAD system is a generic upgrade from the Harrop 8PK that has been on the market for some years. There are only 2 main differences:
o The idler mount is designed to suit the wider 10PK belt.
o The lower pulley has moved upward to enable the larger balancer pulley to be installed.
• The Harrop 10PK drive system has been designed to fit the standard ATI balancer available for the LSA engine.
• Due to the availability of belts the larger balancer pulley is 9mm smaller (245mm 23% overdrive) than the one offered on the H2650i.
• There is only one tensioner pulley diameter used in this configuration.
• The 10PK FEAD system is a generic upgrade from the Harrop 8PK that has been on the market for some years. There are only 2 main differences:
o The idler mount is designed to suit the wider 10PK belt.
o The lower pulley has moved upward to enable the larger balancer pulley to be installed.
• The Harrop 10PK drive system has been designed to fit the standard ATI balancer available for the LSA engine.
• Due to the availability of belts the larger balancer pulley is 9mm smaller (245mm 23% overdrive) than the one offered on the H2650i.
• There is only one tensioner pulley diameter used in this configuration.
Reviews
Review Product
10PK LSA FDFI Triple Idler Mount
Appearance
Installation
Price / Value
Quality
join our
email listYou’ll be first to know about Harrop products, discounts and special events!
Be the first to add a review for this product
Review Product